Do intelligent nursing bed, intelligent wheelchair, enjoy a healthy and good life!

News Center

Industry dynamics

Company News

Explain how to assemble the hand bed below?

Release time:

2023-05-11

Explain how to assemble the hand bed below? Installation of the pneumatic spring on the back of the hand-operated hospital bed: pull up the back bed face to an included angle of 90, screw one end of the pneumatic spring into the pneumatic spring roller bearing on the top of the back bed body with a screw, and then use the shaft pin to connect the pneumatic spring The lower roller bearing is connected with the U-shaped structure of the plate bed, and then the pin is replaced to lock the pin.

Explain how to assemble the hand bed below?

1. Hand-operated hospital bed universal wheel, with two brake pedals, diagonally installed in the screw holes on the legs of the bed board; assemble the remaining two universal wheels into the wire holes of the other two legs.

2. Installation of rear bed body: Use the rear frame pin to connect the rear bed body and the bed board, and then use the pin to lock the pin.

3. Bedroom bed assembly: insert the rear holes on both sides of the bedroom bed and tighten the fastening screws on both sides.

4. Installation of the pneumatic spring on the back of the hand-held hospital bed: pull up the back bed face to an included angle of 90, screw one end of the pneumatic spring into the pneumatic spring roller bearing on the top of the back bed body with a screw, then connect the lower roller bearing of the pneumatic spring with a shaft pin to the U-shaped structure of the plate bed, and then replace the pin to lock the pin shaft.

5. Safety belt assembly: take out the safety belt of the hand-cranked hospital bed, wrap the seat cushion on the bed surface at the head position, and cross the 2 limit holes behind the bed body at the head position.

6. Assembling the foot bed body: First, rotate the leg bed body of the hand-held hospital bed, connect the hole tube with the roller bearing in the hole tube with a shaft sleeve, and clamp it tightly with a pin. Then, turn the screws on both sides of the hole tube sliding sleeve support frame, point the holes on both sides of the hole tube sliding sleeve to the screws in the support frame, and tighten the screws with a wrench. Remove the connection hole between the foot bed body and the thigh bed body, put it on with the tripod shaft pin, and then change the pin to clamp it tightly.

7. Assemblage of the bottom guard: tighten the two bottom guards into the assembling holes of the foot bed body and tighten them tightly.

8. Installation of side pneumatic spring: the installation of side pneumatic spring is the same as that of rear pneumatic spring. It is only necessary to gently extend the side bed body of the hand-operated hospital bed, connect the lower roller bearing of the side pneumatic spring with the bed body according to the U-shaped shaft pin, and then lock the pin shaft with the pin. Then press the side switch button to place the side bed in the vertical direction.

What does that hand-crunch bed do?

The key lies in the turning effect. Patients lying in bed for a long time must turn over the disc frequently, while manual turning over the disc must be carried out with the support of one or two people. However, the hand-operated hospital bed can allow patients to turn the disc at a random angle of view of 0-60 degrees, making medical care convenient and quick.

2. the effect of leaning back, after lying down for a long time, the patient must get up and adjust, or in the case of eating, can use the back effect, and even hemiplegic patients can easily get up.

3. the toilet function, press and hold the controller, and the electric squat can be turned on in only 5 seconds. With back and leg bending functions, the patient can stand to go to the bathroom and remove it after convenience.

4. wash your hair and soak your feet, take down the mattress at the head of the hospital bed, put it in the basin, and wash your hair with back lifting effect. In addition, the bed legs can be removed, and the patient can also use the bed tilt to soak the feet.

If you want to know more about the contents of hand-held hospital beds, you can consult. We are all manufacturers of hand-crank beds and provide a lot of assistance to everyone.

Key words:

Lechi

Tell me about how to choose a hand-held hospital bed.

How to Choose a Reasonable Single Shake Bed?

Tell me about how to choose a hand-held hospital bed.

How to Choose a Reasonable Single Shake Bed?